Automation & Robotics CNC Machining- Precision Components For Smart Manufacturing

FRIMA provide cnc parts for the Automation Industry. We have a wide variety of parts that are essential for the proper functioning of Automation machines. We have years of experience in supplying these parts and our team is always available to help you choose the right part for your needs.

We believe that our parts are of the highest quality and we stand by our products. We offer a 100% satisfaction guarantee on all of our parts.

Requirements for CNC parts used in automation

A key element of automation is of course robotics. Therefore, a large number of manufacturers located in Central and Western Europe focus their production on automation equipment. Our company offers the manufacture of CNC turned and milled parts for robotics and automation. We work according to your drawings and requirements.

There are a few key requirements that CNC parts used in automation must meet in order to function properly. First, the parts must be precise and accurately machined to the required tolerances. Second, the parts must be made from materials that can withstand the rigors of industrial use. And third, the parts must be designed for easy assembly and compatibility with other components in the system.

If you’re looking for CNC parts that meet all of these requirements, we’ve got you covered. We specialize in manufacturing CNC parts for automation applications, and we’re sure we can meet your needs.

Choose FRIMA as your CNC parts Manufacturer

Looking for a top-quality CNC parts manufacturer? Look no further than Frima. We specialize in CNC machining and have the experience and expertise to produce parts that meet the highest standards of quality. We also offer competitive pricing and rapid turnaround times, so you can get the parts you need when you need them.

Top-quality CNC machining
Experienced and expert team
Competitive pricing
Rapid turnaround times

If you’re looking for a CNC parts manufacturer you can trust, contact FRIMA today. We’ll be happy to discuss your needs and provide a free quote.

Industry Pain Points

1.Ultra-tight tolerances for repeatable performance

2.High-speed and high-load operation requirements

3.Complex geometries for custom automation systems

4.Fast prototype development to accelerate time to market

5.Consistent quality for large production runs

6.Compatibility with existing automation equipment

FRIMA Solutions

FRIMA is a leading supplier of precision CNC machined components for the automation and robotics industry. Our advanced 3-axis to 5-axis machining capabilities allow us to produce complex geometries with tolerances as tight as ±0.005mm, ensuring your automation equipment operates with maximum accuracy and reliability. We offer fast prototype services to accelerate your product development cycle and scalable production for high-volume orders.

FRIMA Provides Core Processing Capabilities for the Automation Industry

● 5-axis simultaneous machining for complex robot components

● High-speed CNC milling for aluminum and steel parts

● Precision turning for shafts and bearings

● Swiss machining for small precision components

● Custom jigs, fixtures and tooling design and manufacturing

● Complete assembly and functional testing

Typical Application Parts

Robotics: Robot arms, end effectors, joints, grippers

Linear Motion: Linear guides, ball screws, actuators, bearings

Machine Frames: Base plates, brackets, structural components

Conveyor Systems: Rollers, pulleys, guides, sprockets

Tooling: Custom jigs, fixtures, cutting tools, molds

Core Process Technologies We Can Provide

Process Type	Technical Specifications	Application Scenarios
5-Axis Simultaneous Machining	Interpolation accuracy ±0.003mm, surface roughness Ra ≤ 0.8μm	Complex curved parts, robot joints
High-Speed Milling	Spindle speed 24,000rpm, feed rate 10m/min	Aluminum frames, covers, heat sinks
Precision Grinding	Cylindricity 0.001mm, roundness 0.0005mm	Spindles, guides, bearing housings
Electrical Discharge Machining (EDM)	Minimum electrode diameter 0.1mm, machining accuracy ±0.005mm	Molds, cavities, complex hole systems
Dynamic Balancing Test	Maximum speed 30,000rpm, balance accuracy G0.4	High-speed rotating parts, motor rotors

Free Technical Consultation

Quality and Compliance Standards

ISO 9001:2015 certified

Tolerances down to ±0.005mm

High-rigidity aluminum and steel materials

Dynamic balance testing for moving parts

100% dimensional inspection

Full material traceability

Why Choose FRIMA For Your Industry?

Industry-Specific Expertise: 20+ years of experience serving 5+ key industries

Certified Quality: ISO 9001 and IATF 16949 certified manufacturing

In-House Factory: Complete control over quality, cost and lead time

Free DFM Analysis: Optimize your designs for manufacturability and cost

24-Hour Quote Response: Fast, detailed quotations from our engineering team

Global Delivery: Door-to-door shipping to over 50 countries worldwide

High-precision Machining Capability: Tolerances up to ±0.002mm, meeting the high-precision requirements of automated equipment.

Rapid Prototyping Service: Combining 3D printing and CNC machining, prototype production completed in 3 days.

Customized Tooling Fixtures: Professionally designed and manufactured various tooling fixtures to improve production efficiency.

Small-batch, multi-variety Production: Flexible production scheduling, supporting small-batch orders of 1-1000 pieces.

One-stop Solution: Complete service from parts machining to equipment assembly.

Do you have drawings or component samples?

Please provide your requirements and drawings. We will customize according to your specifications. Alternatively, you can send us sample parts, and our engineers will provide drawings based on the actual parts and produce samples for your reference.

FRIMA Customer Case: Custom Aluminum Robot Arm Components For An Automation Integrator

Challenge: The customer needed lightweight, high-strength robot arm components with tight tolerances for a new pick-and-place system

Solution: FRIMA optimized the design using 6061-T6 aluminum and 5-axis machining to reduce weight while maintaining structural integrity

Result: The new robot arm is 25% lighter than the previous design, allowing for faster cycle times and higher productivity

FAQ

Q: What is the tightest tolerance you can hold?

A: We can hold tolerances as tight as ±0.002mm for Swiss machined parts and ±0.005mm for milled and turned parts.

Q: How fast can you provide prototypes?

A: We offer fast prototype services with lead times as short as 3-7 days for most parts.

Q: Can you produce both prototypes and production parts?

A: Yes, we provide a seamless transition from prototype to production, with scalable manufacturing capabilities to meet your volume requirements.

Q: Do you design custom jigs and fixtures?

A: Yes, our engineering team can design and manufacture custom jigs and fixtures to support your production and assembly processes.

Ready To Get Started On Your Industry-Specific Project?

Upload your drawings today and get a free, no-obligation quotation tailored to your industry requirements. Our team of industry experts is ready to help you find the best manufacturing solution for your application.

Request an Instant Quote for Your Projects!

You will get a professional one-stop solution to boost your business. We’re glad to answer any questions you may have!

Automation Industry