Metal Sheet Fabrication Part
0102030405
OEM Precision Metal Stamping Part
OEM precision metal stamping part service can be customized throughout the entire manufacturing process, from mold development and design to production. Every customer requirement is measured and tested according to the measurement of metal materials, such as metal stamping, punching, deep pumping, and specific angle bending, and then applied to each type of metal.
FRIMA Product Advantages
If you need metal stamping parts that fit perfectly, perform reliably, and arrive on schedule. Whether you’re in automotive, electronics, medical devices, or industrial equipment, our OEM precision metal stamping part service delivers components with:
● Tolerances as tight as ±0.01mm
● Support for complex geometries (bends, embossing, coining, flanging)
● Wide material range – stainless steel, cold-rolled steel, brass, copper, aluminum, and high-strength alloys
● No tooling minimum – from 100 to 1,000,000+ pieces
● Tolerances as tight as ±0.01mm
● Support for complex geometries (bends, embossing, coining, flanging)
● Wide material range – stainless steel, cold-rolled steel, brass, copper, aluminum, and high-strength alloys
● No tooling minimum – from 100 to 1,000,000+ pieces
How does FRIMA control the precision of metal stamping?
Even a fraction of a millimeter of error can lead to assembly failure, product recalls, or costly rework. Our stamping process eliminates errors through the following methods:
● Progressive dies and transfer dies ensure consistent repeatability
● In-process optical inspection (inspected every 50 pieces)
● SPC monitoring of critical dimensions
● Electrical discharge machining (EDM) tools with a hardness of HRC 60-62
● Progressive dies and transfer dies ensure consistent repeatability
● In-process optical inspection (inspected every 50 pieces)
● SPC monitoring of critical dimensions
● Electrical discharge machining (EDM) tools with a hardness of HRC 60-62
Technical Capabilities
| Parameter | Capability |
| Material thickness | 0.1mm – 6.0mm |
| Tolerance (standard) | ±0.05mm |
| Tolerance (precision) | ±0.01mm |
| Max die size | 1200mm x 800mm |
| Press tonnage | 25T – 400T |
| Secondary services | Deburring, heat treating, plating (Zn, Ni, Cr), anodizing, powder coating |
| Lead time (sample) | 7–12 days |
| Lead time (production) | 2–4 weeks (depending on qty) |
Features Of Our Products
1. Requirement: based on drawing and quantity.
2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated, etc.
3. Material: Steel, Stainless steel, Aluminum sheet, Copper, etc.
4. Stamping equipment: 10-500T
5. Delivery time: Within 20 days of receiving your 30% deposit
6. Packing: we will offer you the standard package which includes plastic film, foam, a carton, and a wooden box which is suitable for transporting
2. Surface treatment: Zinc plated, Powder coating, Paint, Nickel plated, etc.
3. Material: Steel, Stainless steel, Aluminum sheet, Copper, etc.
4. Stamping equipment: 10-500T
5. Delivery time: Within 20 days of receiving your 30% deposit
6. Packing: we will offer you the standard package which includes plastic film, foam, a carton, and a wooden box which is suitable for transporting
Materials & Surface Finishes We Work With
Base materials:
● Cold-rolled / hot-rolled steel (SPCC, SPHC, DC01)
● Stainless steel (304, 316, 430)
● Brass (C2600, C2680)
● Copper (C1100)
● Aluminum (5052, 6061)
● Pre-plated metals (tin-plated, nickel-plated)
Surface finishes:
● Zinc plating (clear, yellow, black)
● Nickel / chrome plating
● Anodizing (for aluminum)
● Powder coating (any RAL)
● Electrophoretic deposition (E-coat)
● Passivation (for stainless steel)
● Cold-rolled / hot-rolled steel (SPCC, SPHC, DC01)
● Stainless steel (304, 316, 430)
● Brass (C2600, C2680)
● Copper (C1100)
● Aluminum (5052, 6061)
● Pre-plated metals (tin-plated, nickel-plated)
Surface finishes:
● Zinc plating (clear, yellow, black)
● Nickel / chrome plating
● Anodizing (for aluminum)
● Powder coating (any RAL)
● Electrophoretic deposition (E-coat)
● Passivation (for stainless steel)
What Our Customers Say (Social Proof)
“We switched to this supplier after constant tolerance issues elsewhere. Their stampings are spot-on, and they caught a design flaw in our drawing before tooling. Saved us $15k.”
— Senior Engineer, Automotive Tier 1 Supplier
“Lead times are real – we got 10,000 pieces in 18 days, including plating.”
— Procurement Manager, Medical Device Company
— Senior Engineer, Automotive Tier 1 Supplier
“Lead times are real – we got 10,000 pieces in 18 days, including plating.”
— Procurement Manager, Medical Device Company